inner-banner

Parts & Accessories

Pièces et Accessoires

Accessoires

Couvercle en PVC blancWhite PVC Waste Port Cover

Flexible PVC exhaust tubing 8″ in diameter to be connected at the exhaust port of the CACI negative pressure clean air environments and isolators. Available in linear feet.

Exhaust Tubing

Flexible PVC exhaust tubing 8″ in diameter to be connected at the exhaust port of the CACI negative pressure clean air environments and isolators. Available in linear feet.

Light Covers

Halfsuits are used in large isolators to interface with process equipment such as autoclave, lyophilizer and dry heat ovens and to facilitate the ergonomic transfer of materials from one unit system. Inclined for easy access. Allow for 180° mobility. It is equipped with bungee cords to adjust heights. Must be checked regularly, replacement recommended every 3 years.

Pharmaceutical Accessories

Halfsuit

Halfsuits are used in large isolators to interface with process equipment such as autoclave, lyophilizer and dry heat ovens and to facilitate the ergonomic transfer of materials from one unit system. Inclined for easy access. Allow for 180° mobility. It is equipped with bungee cords to adjust heights. Must be checked regularly, replacement recommended every 3 years.

Ammonia Cloths

Gaskets of different specifications are present throughout every unit. They can be found around gloves ports, doors, connections and filters. Due to their extensive exposure to air, as well as to cleaning solutions, these gaskets will have to be replaced regularly to ensure the integrity of the unit depending on the gasket type and location. Check regularly accordingly to S.O.P.

Bellows

A PVC bellow is an important part in making an air tight connection between two classified environments. This connection can be done directly between 2 process equipments through an Alpha / Beta door. This connection can be used for, but is not limited to, the transfer of products between two units, without breaching the environments.

Gaskets

Gaskets of different specifications are present throughout every unit. They can be found around gloves ports, doors, connections and filters. Due to their extensive exposure to air, as well as to cleaning solutions, these gaskets will have to be replaced regularly to ensure the integrity of the unit depending on the gasket type and location. Check regularly accordingly to S.O.P.

Mixing Fans & Finger Guards

  • .5 mils durable laminated UV treated PVC.
  • Canopy resistant to gas sterilization and cold steriliant decontamination.
  • Needs to be checked regularly. Replacement is recommended every 3 years.

Transfer Door & Containers

Air-tight door are offered in order to ensure an aseptic transfer of product from one environment to the next. Swing doors are offered for a fixed setup while Alpha / Beta doors are provided for a mobile one. Alpha / Beta containers (stainless steel or PVC) are also available, for sterile transfer of products or disposal of waste. In accordance to client specifications; these containers can be autoclaved or sterilized with VHP for a greater efficiency and to ensure a high SAL.

Canopy

  • .5 mils durable laminated UV treated PVC.
  • Canopy resistant to gas sterilization and cold steriliant decontamination.
  • Needs to be checked regularly. Replacement is recommended every 3 years.

Loading Transfer System

Ergonomic stainless steel loading systems to ensure transfer of materials from outside of the clean air environments and isolators in an efficient manner.

Filters

MERV Pre-Filter

HEPA and ULPA filters with a minimum efficiency of 99.99% at 0.3 microns particle size for all clean air technology. Available in many sizes. Safely shipped in crates and tested for efficiency at the factory. Contact the customer service representative for the appropriate size for your unit.

H.E.P.A. Filter

HEPA and ULPA filters with a minimum efficiency of 99.99% at 0.3 microns particle size for all clean air technology. Available in many sizes. Safely shipped in crates and tested for efficiency at the factory. Contact the customer service representative for the appropriate size for your unit.